top of page

Date Shape Group

Public·113 members
Konon Eagles
Konon Eagles

Install Freenas On Iomega Storcenter Ix2 Network



Network support has to be enabled on the installation medium. eth0 is an internal network card that is not used by the ix2-200. eth1 is the actual Gigabit Ethernet adapter wired to the network port on the rear of the unit. eth1 must be enabled and eth0 must be disabled.




install freenas on iomega storcenter ix2 network



FreeNAS is an open source network-attached storage (NAS) operating system based on BSD and the ZFS filesystem with integrated RAID support. FreeNAS operating system is totally based on BSD and can be installed on virtual machines or in physical machines to share data storage via a computer network.


I installed the FreeNAS on a hyper-v server, I set up a network for it.But it cant find a DHCP and when i enter an IP manually it wont work on the network either (yes i use the correct range and mask).When i boot a windows client on the same network interface that i use on the freeNAS, that client works with dynamic and static IP.


NASes typically have some kind of bootloader that is able to install OS on the disk. Just pop in a new disk and try to find the NAS on your network. Enter its IP in the browser and follow instructions on screen.


Gracias Adriwan por su respuesta, el problema que tengo es que el firmware del modelo ix2 no se deja descomprimir (iomega-storcenter-ix2-firmware-2.0.15.43099.tgz) y por lo tanto no puedo copiar los archivos dentro de la 1a partion. Ya intente copiando el sistema de archivos del ix2-200 pero al momento de iniciar el dispositivo se queda con un led azul parpadeando y nunca termina el proceso de inicio. Los archivos que necesito para el ix2 son los siguientes:


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page